www.mywifiext.net

Netgear WiFi range extenders help you boost the strength of your existing WiFi signals. Just perform Netgear WiFi Range Extender Setup and enjoy uninterrupted internet access throughout the house or workplace.

www.mywifiext.net plays an important role in setting up the range extender. When you connect the extender and open a web browser, it will automatically redirect you to mywifiext page. If it doesn’t open by default, take the help from highly-experienced and expert technicians at toll-free 1-888-927-4505.

However, if you are making use of Mac devices such as iPhone, iPad or iPod, use http mywifiext local web address to install and configure your Netgear range extender with these devices. Sometimes, the web address shows error messages when users try to access it. This is because it is not a regular website on the internet. Instead, it is just a local web address used to open the smart setup wizard for new extender setup.

You can resolve this issue with great ease – just connect the extender to the existing home or office network either wirelessly or in a wired manner.

Mywifiext.net Setup

For Netgear Extender Setup, you have to access mywifiext.net setup page. To do so, go through the steps given below:

  • Put the extender on electric power.
  • Make sure that the extender should get a constant power supply throughout the setup.
  • Switch on any WiFi-compatible device such as computer or laptop.
  • Type in mywifiext.net the address bar.
  • Let the mywifiext login page open.
  • Fill in the username and password.
  • Once done, click on login button.

This will take you to the mywifiext.net setup page. In case the web address doesn’t work for you, use Netgear default IP address for log in to the extender.

The IP address can be found at back or bottom side of your extender. In case the sticker containing the default extender IP is missing, check the manual booklet once.

New Extender Setup

There are two methods for New Extender Setup: using an Ethernet cable and through WiFi connection. Both methods require you to access www.mywifiext.net smart wizard.

Important Note: If you are setting up Netgear Extender on Windows device, use mywifiext.com web address for accessing the default login page. On the other hand, make use of mywifiext.net local if you want to install the extender on Mac OS devices like iPhone, iPad, Mac, etc.

  1. Using an Ethernet Cable

To connect the extender manually, there is a need to an Ethernet cable which allows you to make a proper wired connection between computer and extender. Once you have connected the range extender to computer, access the web-user interface using 192.168.1.250 IP address.

It is called as the default IP address meant to open the mywifiext login page. Enter the username and password to proceed further. If you don’t have an account, ensure to create the new one. Select the WiFi network you want to extend and click Continue button.

Enter the password and hit continue button. Change the security settings according to your preferences and click continue.

mywifiext

Be sure to keep the extender in an airy place and away from interference-creating devices such as microwave ovens, cordless phones, mirrors, concrete walls, radios, glasses, refrigerators and related devices. That’s it. Your New Extender Setup has been completed.

It is recommended to change the mywifiext password and other credentials immediately after setting up your WiFi range extender. Doing so will make your new, extended WiFi network more secure. Thus, no one else can enter your network without your permission.

In case you come across any sort of issue and unable to fix it by yourself, get in touch with our technical experts at toll-free 1-888-927-4505 right away. They will make every possible effort and troubleshoot your issues within minutes.

  1. Through a WiFi Connection

If you want to save yourself from the hassle of messy wires or cables, go with the wireless option for Netgear Extender Setup. First and foremost, connect the extender to a wall socket using power adapter. Next, turn on the PC or laptop as per your convenience.

Connect it to a reliable WiFi network. It’s recommended not to use neighboring networks as it can ruin the whole Netgear WiFi range extender setup process if they have weak signal strength.

Go to the login page either by using mywifiext or 192.168.1.250 IP address. Now, click on new extender setup button. Create an account using an email and password. Once done, log in to your account.

Choose the network to extend and enter the password. Thus, you can easily set up your Netgear range extender. If mywifiext.net not working, check the web browser version you are using. If you are running an old version of web browser, update it to the latest one.

Also, check for the typos while entering the web address in URL bar. A wrong web address will take you to another page rather than Netgear extender login portal.

If you still facing the same issue, get immediate mywifiext.net troubleshooting tips from our expert technicians.

Netgear Genie Smart Setup

Netgear Genie smart setup makes the process of new extender setup as easy as a piece of cake. Every Netgear extender comes with a setup CD which provides you steps for installation and configuration. However, this CD usually gets misplaced or lost. In this case, Genie setup helps a lot.

All you have to do is simply open a browser and access mywifiext page. Go to the main setup page using the correct Netgear extender default password. Once done, Netgear Genie setup page will open providing you with on-screen instructions for setting up the extender. But if at any point you face an issue, don’t hesitate to call us at 1-888-927-4505 and we will be there to help you out.

Netgear Genie App – Access Your Extender Network Remotely

Netgear genie app provides a dashboard with which you can not only analyze and maintain your home network but also troubleshoot issues related to it. The availability of this app is cross-platform. In simple words, you can download and use the app on almost all devices such as Windows computer, Mac, Android smartphones and tablets, iPhones, iPods, iPads, and much more.

As soon as your Netgear genie account is connected to the network, it enables you to check the status of WiFi network. What’s more, it even gives you the authority to allow guests access to your wireless network.

Another great feature of the app is network map through which you can see the connected devices to your network. And on the off chance that you run into an issue with the network, genie app will provide you with step-by-step instructions helping you find, diagnose and troubleshoot the problem.

There are a few basic steps to access your Netgear extender network via the genie app:

  • Download and install the genie app on your device.
  • Use your email ID and create a Netgear account.
  • Log in to your extender using the genie app.

Now, a dashboard will appear with which you can access your WiFi range extender network remotely. For further technical assistance, call our experts at any time.

Ultimate Guide To Set Up And Install Netgear Ex6150 Extender

The Netgear extender ex6150 is equipped with FastLane Technology, and it is a comprehensive device to improve your internet speed in the areas of your home that are untouched or get super low Wi-Fi signal.

The best thing is that this extender device uses two frequency bands; 2.4GHz as well as 5GHz. The capability of using both these bands makes it possible to get way better signals than any other normal extender in the marketplace.

This Wi-Fi booster has external antennas and is highly compatible with almost all types of routers that are available in the market. If you are also willing to get improved network speed at your home and have purchased Netgear Ex6150 Extender then this setup and configuration guide will help in easiest manner.

Before preceding with Netgear Extender Setup, you should know the buttons, LEDs, cables, and details about device ports.

Device link and router connection LEDs

  • When there is no connection, the LED will be OFF.
  • If the connection is poor then you will see solid Red LED light.
  • In case, the connection is good/average then the LED light will show up solid amber.
  • The solid green LED light can be seen if the connection is BEST.

WPS LED

  • Off: When the WiFi security is impaired then this light will be OFF
  • When you see the blinking green light, the WiFi secured setup connection setting process is going on.
  • If you can see solid green light then WPA or WPA2 is already ON.

Power LED light color and meaning:

  • If the power LED light is turned off, it means that the device is switched off
  • If you can notice solid green LED light on your device, it indicates that the device is turned on
  • But if you are noticing solid amber-colored LED light, it symbolizes that the device is booting up

Now you are well aware of the LED lights and what they indicate, so figuring out various things regarding some common issues will be quite easy.

The Netgear ex6150 extender can be used in one of the two modes:

  • Access point mode
  • Extender mode
p>This mode will help build a new WiFi hotspot. Follow these steps if you wish to use ex6150 in the access point mode:

  • Ensure turning your device settings to the access point.
  • Choose the extender's location near the router device.
  • Plug-in the WiFi range extender's power cable in the socket and wait for the LED to turn on.
  • Search for the WiFi network using the Network Manager and connect to the preferred one.
  • Access any web browser on your computer and enter the web address mywifiext.net.
  • Click on the button labeled as the access point.
  • You will be asked to create a new account.
  • Enter asked credentials and hit enter.
  • The next step is to set up an SSID as well as a network password.
  • After entering the asked details, press the key labeled as NEXT.
  • Follow the steps shown on the screen.
  • Now, it is time to disengage the device from the power socket. Turn the device ON again. Now, you will be able to connect it to the Extender network. Now punch in the required credentials when asked. You are done!

Follow below-mentioned steps to use your ex6150 device in extender mode:

  • First, make sure that your device is set to the extender. You can ensure it by checking the main switch.
  • Switch your extender device ON.
  • Connect to the available preferred network either via web page setup or via the WPS.
  • After all these settings, turn the device off and restart it again. Configure your wired and wireless devices to connect automatically to your extender WiFi network.

Now you will be able to enjoy fast internet connection in every nook of your home/office.

Read More

Netgear Extender Keeps Going Offline? Here’s the Fix

Despite the fact that Netgear WiFi extender is an exceptional device to get flawless WiFi access all over the home or workplace, it is not free from technical glitches. The most common problem that users face with their Netgear extender is that it keeps going offline.

The issue continues to appear whether you are browsing the Internet, shopping online or streaming your favorite web series. We understand how nettlesome it can be, when your extender keeps dropping the connection and showing offline. Therefore, we are here to help you out.

This post comprises of some proven and lesser-known tactics to resolve 'Netgear extender keeps going offline' issue. Let's get the ball rolling.

1. Check Your Extender's Connections

The most obvious or simplest way to fix any technical issue is by checking the connections. So be certain to check the following points:

  • The antennas (if your extender has) are connected in the right way.
  • The extender is properly connected to a power socket, router and computer.
  • Also, the Ethernet cable you are using is damaged-free.
  • The WiFi extender is getting fluctuation-free power supply.

2. Power-Cycle Your Extender

If all the connections are correct, then try power-cycling your extender. For this, consider these steps:

  • Plug out your Netgear wireless extender from the power socket.
  • Turn it off completely.
  • Now, plug in the extender back to the socket and turn it on.

Confirm that the extender is showing green power LED light.

3. Check the Extender Placement

Still getting the 'Netgear extender is offline' error message? Check the placement of your extender. Once done with new extender setup, place your extender in the home keeping these things in mind:

  • The extender should be kept at a neat and clean place.
  • It must be away from electrical devices like microwave ovens, refrigerators, Bluetooth speakers, cordless phones, etc.
  • Also, the extender should be placed at a certain distance away from concrete walls or corners.

If you have placed your extender nearby the aforementioned things, relocate it right away to get the issue resolved.

4. Update Netgear Extender Firmware

An obsolete firmware version may also result in 'Netgear extender offline' problem. So check if your extender is running on the latest firmware version. If not, go through the steps given below and update your Netgear extender firmware:

  • Open a web browser on your computer.
  • Go to mywifiext web-based page.
  • Click on the Firmware Update section.
  • Wait for some time and let your extender update the firmware.

In this way, you can fix the issue by updating your Netgear extender's firmware.

5. Reset Your Netgear Extender

On the off chance that none of the aforementioned solutions resolved your issue, it's time to go for resetting. Reset your Netgear WiFi extender to the default factory settings. However, keep in mind that the resetting process will clear all your extender's customized settings. So it is suggested you to make a note of all the setting changes made by you during the initial setup. To reset your extender,

  • Press the reset button on your extender.
  • Wait for a few minutes as the extender will reboot itself.

'Netgear extender is offline' issue got fixed? If not, immediately get in touch with our seasoned experts at toll-free 1-888-927-4505 and let them fix the issue for you.

Read More

An Easy Guide To Update Firmware of Netgear Extender

Was your Netgear Extender Setup successful? But still, the range of your WiFi network didn't expand? If yes, it might be the case of the failed Firmware update. We will share a thorough solution, but first read some important details about the Firmware update.

What is Netgear Extender Firmware?

First, you should know what is the role of extender Firmware. Basically, these are a bunch of guidelines that will administer the functioning level of the extender to help boost the network range in the nooks and crannies of your home/workplace. Generally, the firmware is automatically updated. But sometimes, the users change the settings unintentionally, and those predefined update settings can trigger. The latest firmware update is required to reap the full benefits of your WiFi range extender. So we are providing an easy guide to update the Netgear extender firmware, which needs to be followed with complete attention. Few reasons of failed Netgear extender firmware update
  • The automatically downloaded firmware update file is corrupted.
  • The network range is insufficient.
  • The router firmware is also not up to date.
  • Change in default settings of the firmware.
  • Hardware issues in extender or router.
  • The network is not secure.
  • The wires and cables are old and damaged.
Follow below-mentioned tips deliberately:
  • Foremost step is to connect your computer or mobile device to the extender network.
  • Once connected, it is time to access the extender settings.
  • Open any browser and enter Mywifiext.net in the URL bar.
  • Enter the correct credentials to log in to Mywifiext. This action will take you to the next page, and a menu icon will be displayed. Click that icon, and the extender menu will open on your screen.
  • Access the firmware update page from that menu.
  • Now go to settings and find the option for Firmware Update.
  • In some cases, these options can be displayed with different labels. Settings might be labeled as Maintenance, and the followed one can be seen as Firmware Upgrade.
  • Now a button with Check Online label will be shown. Click that.
  • There will be the availability of new firmware. The set of instructions will also be displayed onscreen.
  • Follow those instructions to successfully download the firmware.
  • Once the entire process is completed, the Netgear extender will automatically reboot.
Note: Do not attempt turning off any of the device- extender, mobile or computer during the process. Turning off might hinder the process, and there will be the possibility to start the entire procedure again.

What to do if Mywifiext.net not working?

mywifiext not working We usually keep getting the query for an alternate way to access the extender login page because some users get the error while accessing the page using the web address. If you have also been getting this error simultaneously, don't bother because we have a solution. The optimum way to log in to the extender page is via the IP address.
  • Simply enter 192.168.1.250 in your browser URL bar and hit enter.
  • Enter your login credentials on the displayed page.
  • Now, the rest of the process is exactly the same as explained earlier.
Once you have successfully downloaded and installed the firmware update as per all of the instructions, the network strength will be automatically boosted. Additional tip: Take account of the placement of the router and wi-fi range extender. Don't place them too far from each other. The right placement of both the devices will help the network range tap the far corners of your home or workplace.Read More

How can we set up a Netgear wireless range extender easily?

There are some places in our home where we get very poor, slow and sluggish WiFi signals. The poor wireless or WiFi signal reception can be due to the shape and size of our home. It results in dead zones or blind spots or it can be due to our old home networking router. All these annoying issues can be resolve easily with Netgear extender setup. We just have to place it in reach of our existing WiFi router and it will start boosting the WiFi range inside and outside our home with consistent internets signals all over. There are different easy ways through which we can easily set up a Netgear WiFi range extender.

Netgear WiFi Range Extender Setup: Easy way to boost up the internet speed

Web-browser setup is the easiest way for the Netgear WiFi range extender setup process. In the web-browser setup method, we have to connect a desktop computer or a laptop with the Netgear range extender (wired or wirelessly) and then, we have to load up any preferred web browser on that connected devices and type mywifiext.com or mywifiext.net into the address bar field. To prevent mywifiext.net login issue, we have to make sure that the URL is correctly entered not into the search bar but into the address bar field of our web browser. We can also have more information on how to access mywifiext.net login page here. mywifiext login As soon as we enter the URL, mywifiext.com into the address bar in a internet browser. It will redirect us to Netgear Genie smart setup page. After that, we will be prompt to enter username and password. And then, we need to simply follow the on-screen instructions given on Netgear Genie page and setup our Netgear extender.

An easy hardwire connection can also help us to configure and install a Netgear WiFi range extender

We can setup and install the Netgear WiFi range extender easily by making hardwire connection between our main WiFi router and Netgear range extender. What we have to do - just grab an Ethernet cable. And connect the one end of the Ethernet cable at the back panel of the home networking router and the other end of the Ethernet cable/wire at the back panel. Once the connections both the devices have been made successfully, we have to open any internet browser of our choice on a computer or laptop. And type www.mywifiext.net in the address bar field. Once we are into the mywifiext.net setup and login page, we just have to follow all the positive responses to complete the new extender setup process with ease. For more Netgear extender troubleshooting tips, dial 1-888-927-4505 (toll-free number) and ask for Netgear extender support.

WiFi-Protected setup (WPS) is the quickest method

New Extender Setup The other easy way by which we can set up the Netgear wireless range extender is using the WPS method. There is a WPS button on the Netgear range extender and on our home networking router as well. We simply have to push the WPS button on the Netgear WiFi range extender and hold it for 10-15 seconds. Within 1-2 minutes we have to press the WPS button on our home networking router as well. Then, wait for 2-3 minutes for our devices to boot up completely. P.S:- Prior to applying this method, we have to make sure that our router and the range extender is properly plugged into a wall socket between the range of each other. For more setup and installation of the WiFi range extender, we can also read about what are the different methods of new extender setup.Read More

Netgear EX6200 Setup Step-By-Step Manual (AC1200)

“Check out this post to get familiar with simple and clear steps for Netgear EX6200 Setup.” So you choose Netgear EX6200, great choice! With quad-core processor, MU-MIMO, and 802.11ac dual band, it delivers WiFi up to 1200 MBPS. Undoubtedly, it has the adequate potential to make you get rid of Wi-Fi dead zones in your house or work area. The best part is, it is compatible with any standard wireless router, independent of the manufacturer. Overall, it is one of the best wireless extender in this price segment. Over to the Netgear extender setup now. The Netgear EX6200 setup will bring forth two sections – “Connecting the extender” and “Log in to the online setup portal”. We will discuss both of these with their respective detailed steps. Note: You are advised to execute the steps in the exact order as they're provided. Do not speculate anything of your own for the setup part.

Connecting the extender for the Netgear EX6200 Setup

mywifiext Below are the detailed instructions for connecting the extender to the router:
  • Look out for a decent location to place your extender, provided that it should be near (as much as possible) to the main router.
  • After the placing the extender, connect its power cable to the electric outlet.
  • Press the power ON/OFF button, only if needed. (If there is an amber light on the link rate LED's, no need to press the power button.
  • After about a half a minute the LED'S will stop glowing.
  • Now you need a computer or laptop and an Ethernet cable.
  • Disconnect your computer from any connected WiFi or Ethernet network.
  • Use the Ethernet cable to connect the extender with the router. (You are free to use any available Ethernet port.)
  • On the off chance, if you face any trouble connecting, restart your computer and ensure that the Ethernet cable is snugly attached to the both ports.
Note: Some users connect the extender to the router using the Ethernet cable, which is totally inappropriate. Reason being, your extender is specifically designed to only use the wireless functionality to pair up with the router.
  •  When the extender successfully connect with the computer, the Extender connection LED glows.
Now it's time for login to the setup portal.

Login to the Extender setup Portal

new extender setup
  • Click on any web browser icon, be it be Mozilla Firefox or Google Chrome.
  • The web-browser will navigate you to set up page which is mywifiext.net.
Help Tip : What should you do when you're unable to access mywifiext.net mywifiext.net is the address on the web that open the setup wizard of the Netgear devices, which is also known as Netgear Genie. It is a sort of login page dedicated to the particular device that you wish to setup. Every now and then, users may face some issues while attempting to access this address. To get rid of  this verify that extender is properly connected to router and the computer. Then you must go for power-cycling the extender. What else – use a different web browser with cache and cookies cleared.
  • Inside the mywifiext.net login page, tap on “New Extender Setup”.
  • On the next screen, use the prompted boxes to set up your extender login credentials.
  • Tap on “AS WIRELESS RANGE EXTENDER” when asked that how you wish to use your device.
  • Choose the wireless network and you wish to extend and tap on next button.
  • Type in the security settings for the chosen network.
  • The Extender will now pair with the selected network, it may take around 2 minutes. Follow the further on-screen instructions.
Finally, a success page will confirm that you have successfully executed the setup process.Read More

How to Extend the WiFi Range with Netgear range extenders

mywifiext The WiFi dead zones are those spots in your house where the internet seems less or disappear. As a matter of fact, with all the devices, architectural interference, cordless phone, Bluetooth speakers, and metal appliances in the average home, even the fastest and your most powerful WiFi router can miss a few spots in your home. Netgear extender setup is a simple and economical way to bring life to dead zones.

Netgear WiFi Signal Boosters

Wireless range extenders are also known as signal boosters. They help in boosting the existing wireless range in your home by receiving the internet signals from your main router and replicating them with external antennas and powerful amplifiers, extending your WIFi coverage by 2x faster the range. Netgear Smart WiFi range extenders are universally compatible. It can boost the wireless range of any standard WiFi router from any brand.

How to improve the extender performance

The best to place your Netgear extender is halfway between your existing WiFi router and the dead zone. Soon after the Netgear WiFi range extender setup process via www.mywifiext.net wed address your signal strength and bandwidth will be boosted immediately and directed to the WiFi trouble/blind spot. On the other hand, range extender should be placed openly at a higher place and away from interference-creating WiFi obstruction like electronic gadgets and toys, microwave, security alarms, automatic garage opener, treadmill, and baby monitor.

WiFi Analytics Application

mywifiext.net Prior to setting up your Netgear WiFi range extender, it is recommended to you download the Netgear’s WiFi analytics application to test the WiFi signal strength in your rooms throughout your home. On the other hand, this app also helps in identifying where your WiFi coverage is poor/weakest. Once you’ve set up and installed your smart WiFi booster, make use of the WiFi analytics app once again in order to see how your network speed has improved and test the signal strength as well. In addition, the WiFi analytics app can:
  • Help in optimizing your home WiFi network.
  • Check your network status.
  • Monitor the existing signal strength.
  • With the least traffic interference, the WiFi analytics app can identify WiFi channels as well.

Desktop or Wall-plug Design?

netgear extender setup You have two great options handy. Netgear WiFi range extenders come in two (2) types of form factors:
  • One is those that are meant for desktop placement. A great choice if you want up to five (5) Ethernet ports to connect more wired (network-ready) devices and USB (Universal Serial Bus) storage options.
  • Another one is those that are plugged directly into the wall socket. If you prefer a less obtrusive, wire-free design.

Netgear WiFi booster: Perk up your entertainment WOW Factor

If you are too serious about your online gaming and live streaming entertainment then it is recommended to use a WiFi range extender to give your device (any) with a network port (wired) and great WiFi connectivity. It's pretty easy to do! Simply use an Ethernet cable to connect your Smart HD TV, Blu-ray player, or game console to your WiFi Extender’s Ethernet port. And that's it. You've now connected your device wirelessly to your existing WiFi network without any issue. Note: It is also recommended to upgrade your home theater to the fastest, uninterrupted and continuous WiFi speeds available.

FastLane Technology

FastLane If you want to extend the range of your dual-band router, it’s very much important to choose the best signal booster. Most dual-band WiFi range extenders connect to your WiFi router and your device on both bands (2.4GHz and 5GHz) at the same piece of time. Sharing both bands can result in lower overall networking speed. All Netgear dual-band wireless range extenders support FastLane technology, to ensure faster internet speed. In addition, the FastLane technology lets you link one WiFi band to your main router and connect the other band to your WiFi-enabled devices.

New Wireless Access Points (AP)

Use a Netgear range extender as an Access Point (AP) mode to create new and secure wireless access. Provided that, your office or home has wired  network connections with CAT5 or Ethernet outlets. Just switch your range extender to AP (Access Point) Mode.
  • For this, you have to connect your computer or laptop with your Netgear device wirelessly or with the help of an Ethernet cable.
  • After that, load up a relevant, cache, cookies, and browsing history free web browser.
  • Type the web address mywifiext.net or Netgear default IP address i.e. 192.168.1.250 in the URL bar.
  • Hit the Enter key.
  • Enter login credentials (when prompt).
  • And follow the on-screen instructions given on Netgear Genie smart setup to setup and install your range extender as an access point mode.
  • For further assistance, please contact our technical department at toll-free number 1-888-927-4505.
Now connect and roam freely in every corner of your house mywifiext Netgear WiFi range extender can add the final piece to high and uninterrupted internet speed. So, you can freely stream music in your backyard, courtyard, terrace, garage, balcony, lobby and video chat in your kitchen without signal breakage, or play online games, download stuff from the internet in your basement. In other words, Netgear WiFi range extenders lets you to enjoy high-speed of the internet everywhere in your house.Read More

Steps to Change Netgear Extender Default Password With Ease

Want to make your Netgear extender home network safe and sound? If a big yes, the best practice is to change the default password of your extender to something else. If you are still using the Netgear extender default password, it is recommended to change it right away. Most of the users unfamiliar with the fact that anyone within their network range can easily find the network password. Once they get to know the default passphrase, they can make setting changes without your knowledge, thus preventing you from gaining access to your own WiFi network. Therefore, change the SSID as well as password of your wireless network without giving any second thought. You can do so through mywifiext web address. This post will thoroughly guide you on how to change the default WiFi range extender password in a hassle-free manner. Let's dive in. However, for quick assistance to change the Netgear extender default password, you can reach out to the experts at toll-free 1-888-927-4505 (24x7 Helpline). Before getting started, let us ask a question to you i.e. what is SSID? In case you are totally unaware of the term, panic not! Thousands of computer users don't know the term either, and that is completely okay. In layman's terms, SSID is a technical term meant for the network name. SSID is an abbreviation used for Service Set Identifier. Users often see an SSID when they use a mobile device to connect to a wireless network. Let's make it clearer with an example – In case you are in a cafe, hotel or restaurant and trying to connect your smartphone to a local WiFi, then you will see a list of SSIDs. This list basically is all about the network names present within the range of your device. You just need to select the name of cafe, hotel or restaurant network and enter the password to connect. That's enough to make you well-versed with SSID. Almost all extender manufacturers set up their devices to make use of a generic name by default. Hence, security experts recommend you to change the Netgear extender default password. Here's how to do so.

Change the Default Password for Netgear Extender

mywifiext.net Follow the instructions given below to get the job done:
  1. Firstly, you need to connect the Netgear WiFi range extender to a computer system. For this, you can use either a wired connection or connect it wirelessly.
  2. Once there is a reliable connection between the extender and PC, apply constant and fluctuation-free power supply to both of the devices.
  3. Be certain to connect to a high-speed WiFi network on your computer. To do so, click on the network icon and choose a WiFi network to connect. Keep in mind that it must not be a neighboring network.
  4. Now, you are ready to access the default extender login page.
  5. For this, launch an internet browser on your PC and visit mywifiext.net web page.
  6. Type the username and password in the given boxes.
  7. After that, Netgear genie smart setup page will open.
  8. Head over to Admin settings.
  9. Click on 'set password' option.
  10. Type the old passphrase i.e. Netgear extender default password.
  11. Thereafter, type the new password you want to keep.
  12. You will require to enter the new password twice for security purpose.
  13. At last, click on Apply button to make the changes effective.
And there you are! Using the aforementioned simple and easy steps, you can change the default password as well as network name or SSID of your Netgear WiFi range extender. If you need any technical assistance during the process, bear in mind to contact the well-trained experts at toll-free 1-888-927-4505.Read More